8283091: Support type conversion between different data sizes in SLP

After JDK-8275317, C2's SLP vectorizer has supported type conversion
between the same data size. We can also support conversions between
different data sizes like:
int <-> double
float <-> long
int <-> long
float <-> double

A typical test case:

int[] a;
double[] b;
for (int i = start; i < limit; i++) {
    b[i] = (double) a[i];
}

Our expected OptoAssembly code for one iteration is like below:

add R12, R2, R11, LShiftL #2
vector_load   V16,[R12, #16]
vectorcast_i2d  V16, V16  # convert I to D vector
add R11, R1, R11, LShiftL #3	# ptr
add R13, R11, #16	# ptr
vector_store [R13], V16

To enable the vectorization, the patch solves the following problems
in the SLP.

There are three main operations in the case above, LoadI, ConvI2D and
StoreD. Assuming that the vector length is 128 bits, how many scalar
nodes should be packed together to a vector? If we decide it
separately for each operation node, like what we did before the patch
in SuperWord::combine_packs(), a 128-bit vector will support 4 LoadI
or 2 ConvI2D or 2 StoreD nodes. However, if we put these packed nodes
in a vector node sequence, like loading 4 elements to a vector, then
typecasting 2 elements and lastly storing these 2 elements, they become
invalid. As a result, we should look through the whole def-use chain
and then pick up the minimum of these element sizes, like function
SuperWord::max_vector_size_in_ud_chain() do in the superword.cpp.
In this case, we pack 2 LoadI, 2 ConvI2D and 2 StoreD nodes, and then
generate valid vector node sequence, like loading 2 elements,
converting the 2 elements to another type and storing the 2 elements
with new type.

After this, LoadI nodes don't make full use of the whole vector and
only occupy part of it. So we adapt the code in
SuperWord::get_vw_bytes_special() to the situation.

In SLP, we calculate a kind of alignment as position trace for each
scalar node in the whole vector. In this case, the alignments for 2
LoadI nodes are 0, 4 while the alignment for 2 ConvI2D nodes are 0, 8.
Sometimes, 4 for LoadI and 8 for ConvI2D work the same, both of which
mark that this node is the second node in the whole vector, while the
difference between 4 and 8 are just because of their own data sizes. In
this situation, we should try to remove the impact caused by different
data size in SLP. For example, in the stage of
SuperWord::extend_packlist(), while determining if it's potential to
pack a pair of def nodes in the function SuperWord::follow_use_defs(),
we remove the side effect of different data size by transforming the
target alignment from the use node. Because we believe that, assuming
that the vector length is 512 bits, if the ConvI2D use nodes have
alignments of 16-24 and their def nodes, LoadI, have alignments of 8-12,
these two LoadI nodes should be packed as a pair as well.

Similarly, when determining if the vectorization is profitable, type
conversion between different data size takes a type of one size and
produces a type of another size, hence the special checks on alignment
and size should be applied, like what we do in SuperWord::is_vector_use.

After solving these problems, we successfully implemented the
vectorization of type conversion between different data sizes.

Here is the test data on NEON:

Before the patch:
Benchmark              (length)  Mode  Cnt    Score   Error  Units
  VectorLoop.convertD2F       523  avgt   15  216.431 ± 0.131  ns/op
  VectorLoop.convertD2I       523  avgt   15  220.522 ± 0.311  ns/op
  VectorLoop.convertF2D       523  avgt   15  217.034 ± 0.292  ns/op
  VectorLoop.convertF2L       523  avgt   15  231.634 ± 1.881  ns/op
  VectorLoop.convertI2D       523  avgt   15  229.538 ± 0.095  ns/op
  VectorLoop.convertI2L       523  avgt   15  214.822 ± 0.131  ns/op
  VectorLoop.convertL2F       523  avgt   15  230.188 ± 0.217  ns/op
  VectorLoop.convertL2I       523  avgt   15  162.234 ± 0.235  ns/op

After the patch:
Benchmark              (length)  Mode  Cnt    Score    Error  Units
  VectorLoop.convertD2F       523  avgt   15  124.352 ±  1.079  ns/op
  VectorLoop.convertD2I       523  avgt   15  557.388 ±  8.166  ns/op
  VectorLoop.convertF2D       523  avgt   15  118.082 ±  4.026  ns/op
  VectorLoop.convertF2L       523  avgt   15  225.810 ± 11.180  ns/op
  VectorLoop.convertI2D       523  avgt   15  166.247 ±  0.120  ns/op
  VectorLoop.convertI2L       523  avgt   15  119.699 ±  2.925  ns/op
  VectorLoop.convertL2F       523  avgt   15  220.847 ±  0.053  ns/op
  VectorLoop.convertL2I       523  avgt   15  122.339 ±  2.738  ns/op

perf data on X86:
Before the patch:
Benchmark              (length)  Mode  Cnt    Score   Error  Units
  VectorLoop.convertD2F       523  avgt   15  279.466 ± 0.069  ns/op
  VectorLoop.convertD2I       523  avgt   15  551.009 ± 7.459  ns/op
  VectorLoop.convertF2D       523  avgt   15  276.066 ± 0.117  ns/op
  VectorLoop.convertF2L       523  avgt   15  545.108 ± 5.697  ns/op
  VectorLoop.convertI2D       523  avgt   15  745.303 ± 0.185  ns/op
  VectorLoop.convertI2L       523  avgt   15  260.878 ± 0.044  ns/op
  VectorLoop.convertL2F       523  avgt   15  502.016 ± 0.172  ns/op
  VectorLoop.convertL2I       523  avgt   15  261.654 ± 3.326  ns/op

After the patch:
Benchmark              (length)  Mode  Cnt    Score   Error  Units
  VectorLoop.convertD2F       523  avgt   15  106.975 ± 0.045  ns/op
  VectorLoop.convertD2I       523  avgt   15  546.866 ± 9.287  ns/op
  VectorLoop.convertF2D       523  avgt   15   82.414 ± 0.340  ns/op
  VectorLoop.convertF2L       523  avgt   15  542.235 ± 2.785  ns/op
  VectorLoop.convertI2D       523  avgt   15   92.966 ± 1.400  ns/op
  VectorLoop.convertI2L       523  avgt   15   79.960 ± 0.528  ns/op
  VectorLoop.convertL2F       523  avgt   15  504.712 ± 4.794  ns/op
  VectorLoop.convertL2I       523  avgt   15  129.753 ± 0.094  ns/op

perf data on AVX512:
Before the patch:
Benchmark              (length)  Mode  Cnt    Score   Error  Units
  VectorLoop.convertD2F       523  avgt   15  282.984 ± 4.022  ns/op
  VectorLoop.convertD2I       523  avgt   15  543.080 ± 3.873  ns/op
  VectorLoop.convertF2D       523  avgt   15  273.950 ± 0.131  ns/op
  VectorLoop.convertF2L       523  avgt   15  539.568 ± 2.747  ns/op
  VectorLoop.convertI2D       523  avgt   15  745.238 ± 0.069  ns/op
  VectorLoop.convertI2L       523  avgt   15  260.935 ± 0.169  ns/op
  VectorLoop.convertL2F       523  avgt   15  501.870 ± 0.359  ns/op
  VectorLoop.convertL2I       523  avgt   15  257.508 ± 0.174  ns/op

After the patch:
Benchmark              (length)  Mode  Cnt    Score   Error  Units
  VectorLoop.convertD2F       523  avgt   15   76.687 ± 0.530  ns/op
  VectorLoop.convertD2I       523  avgt   15  545.408 ± 4.657  ns/op
  VectorLoop.convertF2D       523  avgt   15  273.935 ± 0.099  ns/op
  VectorLoop.convertF2L       523  avgt   15  540.534 ± 3.032  ns/op
  VectorLoop.convertI2D       523  avgt   15  745.234 ± 0.053  ns/op
  VectorLoop.convertI2L       523  avgt   15  260.865 ± 0.104  ns/op
  VectorLoop.convertL2F       523  avgt   15   63.834 ± 4.777  ns/op
  VectorLoop.convertL2I       523  avgt   15   48.183 ± 0.990  ns/op

Change-Id: I93e60fd956547dad9204ceec90220145c58a72ef